Overview / Main Features

Power: One AA Battery (0.9V~4.2V)

Output: Maximum - 109 lumens; Moonlight - 0.2 lumens

Runtime: Maximum - 1.2 hours; Moonlight - 10 days

Strobe: Strobe, S.O.S., and Beacon flash modes

Specifications

• Powered by: 1 AA battery (included)
• LED Emitter: Premium Cree XP-G R5
• Voltage range: 0.9V ~ 4.2V
• Dimensions

  Length: 3.8 inches
  Diameter: 0.86 inches
  Weight: 1.8 ounces

• 5 Current Regulated Output Levels
• 3 Flash modes: Strobe, SOS, Beacon
• Square threads for lifetime smooth operation
• Type III Hard Anodized finish
• Fully knurled
• Reversable/Removable Clip
• Flexible & secure finger grip accessory
• IPX-8 Waterproofing
• Impact-resistant glass lens with Dual-coating - sapphire coating on the outside and anti-reflective coating on the inside for optimal efficiency and durability.
• T-6061 Aircraft-grade Aluminum Body
• Stands on Tail (candle mode)

Typical Output Levels and Runtimes + (LED drive current)

Moonlight: 0.2 lumens for 10 days (1ma)
Low: 4 lumens for 2 days (10ma)
Medium: 22 lumens for 6 hours (50ma)
High: 85 lumens for 1.5 hours (250ma)
Max: 109 lumens for 1.2 hours (350ma)
Strobe: 109 lumens for 2.5 hours
Beacon: 0-109 lumens pulse for 18 hours

Operation

Operating your Quark AA is simple. Make sure its batteries are inserted with the positive side (+) toward the head. Ensure the bezel (the 'head' of the light) and tailcap are tightened, then depress the tailcap button fully so that it 'clicks' and the light turns on.

The two most commonly used modes are Max and Moonlight, the highest and lowest modes. To access Max, you simply tighten the bezel. To access Moonlight, you just loosen the bezel a half-turn. That's it.

You can also cycle through the Quark's other modes just as easily. Lightly depress the button momentarily (you don't need to 'click' it off) and the output will switch to the next mode. The mode sequence is determined by whether the bezel is tightened or loosened:

Loosened Bezel: Moonlight -> Low -> Medium -> High -> SOS -> Beacon

Tightened Bezel: Max -> Strobe

Once the Quark has been turned off for at least three seconds, it will revert to the first level of output in the sequence, either Moonlight or Max.