m menu image  m home m cart


Hinderer XM-18 3.5 and 4.0 Copper Pivot Screw

Price $21.99 CDN

Add to Cart:


NOTE: If ordered by itself, this item has our minimum shipping charge of $7 for B.C, $9.50 for AL, SK, MB and $11 for the rest of Canada. If added to an order with a shipping charge already, then it will only add between $0.50 to $1.50 to the total shipping cost.

Our Copper Pivot Screws are a direct replacement for the stock stainless steel model. The 3" XM-18 has a specific size pivot screw, the XM-18 3.5" and XM-24 use the same screw. Please make sure to order the right size screw for your knife.

EKLIPSE and ZT 0392 owners, the 3.5" / XM-24 version will work with your knife.

Please use great care when installing the copper pivot screws, if your screw driver slips it will more than likely scratch the anodized finish. The Hinderer Armorer's Tool has a precise fit screw driver blade to help eliminate any movement inside the slot that can damage the finish. If using a standard screw driver, we suggest putting masking tape on the tip to prevent marring of the finish. If you do damage the finish inside the slot you can use 360-600 grit sandpaper to sand the slot uniformly for a 2-tone finish. We are not responsible for any finish scratches during installation.


"Because this hardware is in copper, it will naturally patina over time when exposed to air or oils etc. The hardware has been bagged carefully, but may arrive with patina already starting "


  • Model: RHPSXM1835Cu
  • Manufactured by: Hinderer

This product was added to our catalog on Wednesday 13 November, 2019.